Difference between revisions of "Hinge Bay"

From Archaeopedia
Jump to: navigation, search
(Summary of Manukau Timber Company Sawmill Conservation Plan)
(Summary of Manukau Timber Company Sawmill Conservation Plan)
Line 12: Line 12:
 
[[Image:Law.jpg|right|150px]]
 
[[Image:Law.jpg|right|150px]]
 
A conservation plan was prepared for the Auckland Regional Council by [[Law Garry|Garry Law]], Law Associates Ltd, and John Coster, Heritage Works.
 
A conservation plan was prepared for the Auckland Regional Council by [[Law Garry|Garry Law]], Law Associates Ltd, and John Coster, Heritage Works.
 +
 
G Law and J Coster 2000 '''Manukau Timber Company Mill, Hinge Bay, Huia (Site Q11/472) Conservation Plan.''' Prepared for the Auckland Regional Council, Law Associates Ltd and Heritage Works.
 
G Law and J Coster 2000 '''Manukau Timber Company Mill, Hinge Bay, Huia (Site Q11/472) Conservation Plan.''' Prepared for the Auckland Regional Council, Law Associates Ltd and Heritage Works.
 +
 +
The mill was built partly on concrete foundations in the intertidal zone on a boulder beach. Much of these foundations, some including timber baulks are still insitu. Part of the mill was built on the sandy flat behind the beach. An engine foundation exists in that situation. The mill utilised kauri logs from the Waitakere Ranges behind the bay. These were driven by timber dams down several streams. The main source is believed to be the Huia Stream, with the logs caught in a boom at the sea front, floated around to the mill and hauled up a ramp to the mill floor. The milled timber was stacked to the west of the mill and shipped out via a light tramway to the wharf. The wharf would not accomodate anything but small vessels. Some timber was shipped by floating baulks out to larger ships.
 +
 +
 
  
 
----
 
----

Revision as of 23:10, 6 June 2008

Hinge Bay - Manukau Timber Company Sawmill

Warning.png This page is a Stub
Further content needs to be added. For changes please drop a note to the webmaster.

Hinge Bay is the site of a sawmill built by the Manukau Timber Company. It operated from 1891 to 1895. There was an associated wharf and manager's house. The latter still survivies as part of an outdoors education camp. The mill was built on the water's edge and the surviving remains include the concrete pile foundations and a steam engine foundation.

There is a guided walk to the site starting at the Huia Museum. The Auckland Regional Council interpretation was undertaken by Caroline Phillips.

The site is scheduled for preservation or protection in the Auckland Regional Plan: Coastal - Site No. 54.

Summary of Manukau Timber Company Sawmill Conservation Plan

Law.jpg

A conservation plan was prepared for the Auckland Regional Council by Garry Law, Law Associates Ltd, and John Coster, Heritage Works.

G Law and J Coster 2000 Manukau Timber Company Mill, Hinge Bay, Huia (Site Q11/472) Conservation Plan. Prepared for the Auckland Regional Council, Law Associates Ltd and Heritage Works.

The mill was built partly on concrete foundations in the intertidal zone on a boulder beach. Much of these foundations, some including timber baulks are still insitu. Part of the mill was built on the sandy flat behind the beach. An engine foundation exists in that situation. The mill utilised kauri logs from the Waitakere Ranges behind the bay. These were driven by timber dams down several streams. The main source is believed to be the Huia Stream, with the logs caught in a boom at the sea front, floated around to the mill and hauled up a ramp to the mill floor. The milled timber was stacked to the west of the mill and shipped out via a light tramway to the wharf. The wharf would not accomodate anything but small vessels. Some timber was shipped by floating baulks out to larger ships.



Location and Date

  • The site is on a natural bolder beach backed by a sandy terrace.
  • The site was used as a sawmill from 1891 to 1895.
  • The investifation for the conservation plan was undertaken in 1999/2000.

<googlemap lat="-37.007179" lon="174.563549" zoom="17"> -37.006657, 174.56416, Sawmill site -37.007539, 174.563785, Wharf site -37.007556, 174.563141, Mill manager's house</googlemap>


Type

The site is a steam powered sawmill and related wharf.


Team

  • John Coster
  • Kate Hill

Artefacts

Small Collection of artefacts

Documents

Conservation Plan: G Law and J Coster 2000 Manukau Timber Company Mill, Hinge Bay, Huia (Site Q11/472) Conservation Plan. Prepared for the Auckland Regional Council, Law Associates Ltd and Heritage Works, (unpublished).